Intelligent Battery Back-UpLifecycle: Fully Developed | Released: August 2006 | RoHS Compliant
The TS-BAT3 board is a PC/104 daughter card (standard format) which provides 5V of regulated DC voltage to the PC/104 bus, acting as a back-up power supply.
- NiMH batteries provide up to 1Ah at 5 VDC
- Helps to avoid filesystem corruption due to power loss
- Allows graceful shutdown of system
- Charging circuit keeps batteries at full capacity
- Linux drivers and software included
No minimum order quantity on standard products.
The TS-BAT3 board is a PC/104 daughter card (standard format) which provides 5V of regulated DC voltage to the PC/104 bus, acting as a back-up power supply. Although designed to operate with the TS-7XXX series of products, it should work with any PC/104 main board, provided that the appropriate software is installed. It is powered by three NiMH cells with a rated capacity of 2000mAh.
The TS-BAT3 acts as an embedded UPS (uninterruptible power supply). In the event of an external power interruption, the TS-BAT3 will allow for an elegant software shutdown, seamlessly switching to battery power with no interruptions in 5V power, preventing the filesystem corruption that often results from unexpected power loss. A flash sector that loses power in the middle of a write op is lost forever. The TS-BAT3 keeps flash chips from developing bad blocks by providing back up power so that flash write operations always have time to complete.
The TS-BAT3 is also ideally suited for applications far from an external power source. The TS-BAT3, using sleep modes combined with the TS-7260, can run an embedded system for days in the field. This combination is excellent for solar-powered solutions. The TS-BAT3 includes a virtual battery fuel gauge (accessible via software, with no physical indicator) which allows application software to make intelligent decisions based on remaining power.
The TS-BAT3 provides a serial COM port interface for communication. A TS-UART serial port (similar to the standard 16C550) appears as a selectable PC-compatible COM port for software compatibility and embeddedTS provides appropriate serial port driver binary and source. The TS-Linux distribution already includes Linux drivers for the TS-UART core by default. Packets are transmitted using a modified HDLC protocol. An application is available for configuring and reading the status of the TS-BAT3.
Detailed Feature List
- Guarantees controlled SBC shutdown
- NiMH rechargeable batteries
- 1000 mA-hour of 5V power
- Sleep mode w/ programmable wake-up
- Powers SBCs for days in low-duty cycle
- ADC monitors charge/discharge rates
- 5V DC or unregulated 8-28V DC power
- Works with any PC/104 SBC
- Linux drivers and utilities available
- Provides up to 1200mA of 5V power
embeddedTS provides complete documentation for our mature products, including manuals, schematics, mechanical drawings, etc. The most recent documentation files are always made available through our website. If you don't find the documentation you are looking for, contact support for more information. Also, please make sure to visit our Embedded Systems Support webpage, and our official documentation.
From the Blog:
|Operating Supply Voltage||5 VDC or 8 to 28 VDC|
|Fanless Temperature Range||0 °C to 45 °C|
|TS-BAT3||Intelligent Battery Back-up Board||Pricing|